This Is How To Replace Rayco Stump Grinder Teeth

This Is How To Replace Rayco Stump Grinder Teeth

Are you planning to replace your Rayco stump grinder teeth? Well, you do not have to hire a professional to do this for you. If you have time and the basic tools supplied with the machine, you can do it yourself. In this guide, we are providing you with some of the steps you should follow to replace Rayco stump grinder teeth.

Step 1: Remove Spark Plug

The first step should be about safety. The stump grinder wheel is one of the most dangerous parts of the machine. Make sure that you have removed the spark plug and keep it in the pocket. This is to ensure no one will start the machine while you are working on it. This is very important for your safety.

Step 2: Prepare Work Surface

Make sure that you have everything set for the replacement work. One of the things you need to do is cleaning the area you intend to use for the replacement. If it is the garage, make sure have clean it to enable you to locate even the smallest nuts and bolts. Preparing the work surface also helps make the work easier and improves your safety.

Step 3: Remove old Teeth

With the right tools, start removing the old Rayco stump grinder teeth. This should not be difficult to do if you had cleaned the wheel thoroughly to remove buildups on the teeth. To make the process easy, make it methodical to avoid losing track of things. Remember, the replacement is the reverse of the removal process. So, you need to be very keen.

Step 4: Clean Teeth Cavity

Once you have all the old teeth removed, you need to clean the wheel. Remove all the buildups in the cavities, including any form of rust. This should not be difficult because you can use cleaning detergents and a rug or piece of cloth. Machine oil can also be used to clean cavities.

Step 5: Install New Teeth

Using the same tools used for removing old teeth, start installing new Rayco stump grinder teeth. This should not be a difficult thing, consider you had removed the old ones. Set the teeth in the cavity and tighten the set of screws. Ensure the teeth is tight, and it’s not moving.

Step 6: Test The Teeth

Install the spark plug and start your Rayco stump grinder. Test whether the teeth were properly install by grinding a stump. If they are still tight and not moving, the machine is ready for work.


Comments are closed.