These Hacks Will Improve Auger Tips Performance

These Hacks Will Improve Auger Tips Performance

The performance of the auger tip or auger teeth tip is critical to the overall performance of the drilling machine. However, the performance of the auger teeth will always deteriorate with time as the teeth wear down. Fortunately, there are ways that you can keep your auger tip performance at its peak always. Most of these hacks are just common measures that you should take to keep you auger teeth in excellent condition.

Proper Application

One of the major causes of poor auger tip performance is an improper application. The main thing that you need to note is that there are different types of tips for different application. If the wrong teeth are used, then you will have a problem with poor performance and also increased the rate of wear. Therefore, make sure that you are using the right teeth for the right task. That way, you will easily hit maximum or peak performance with you auger tip.

Proper Cooling

Cooling auger tip is another crucial way of improving the auger tip productivity. There is a lot of heat generated while drilling and that can cause severe damage to the teeth. Note that high heat also causes a high rate of wear of teeth. Make sure that the cooling system is in place to keep the tip working effectively. Use of water is one of the most effective cooling methods for the foundation drilling. Make sure that you have used plenty of water since foundation drilling produced quite a lot of heat.

Regular Cleaning and Sharpening

Dull and blunt auger tips are some of the leading causes poor performance of your machine. Most of these problems are caused by the exposure of the auger tip to hard conditions. However, this is a problem that you can easily solve by yourself. Do regular cleaning of the tip to remove sticky material that could be causing poor performance. If the problem is blunt or dull tooth tip, sharpen it regularly to restore its original sharpness.

Quality of Tip

The most important thing is the quality of the tooth tip. Make sure that you have invested in the best quality material. There are numerous types though, but the choice should be determined by the kind of drilling you are about to take. However, the most recommended is the highest grade of carbide material. Tungsten carbide is the best material that would make the best auger tip.

0 comments:

Leave a Reply

Your email address will not be published. Required fields are marked *