Having Problem With Auger Teeth Performance? This Is How You Improve It

Having Problem With Auger Teeth Performance? This Is How You Improve It

If you are having problems with auger teeth performance, then you need to consider several things to address it. First, you need to know what is really causing the problem. In most cases, the quality of the teeth is usually the biggest problem. So how do you fix the issue of poor quality cutter tools in your drilling equipment?

Making replacement with better quality tools is the most efficient way to go about it. There are a few factors that you need to consider to ensure that the quality of the auger teeth is not compromised. Here are three things that improve your auger cutter tools.

Tungsten Carbide Hardfacing

One of the best ways to improve the quality of your auger teeth is carbide hardfacing. This is a technical that widely being used by machine tools manufacturers to make their tools competitive. As the name suggests, tungsten carbide hardfacing involves the use of tungsten carbide for a coating on the auger teeth to improve its quality. With a tungsten carbide coating, your auger teeth will wear less. They will also offer a higher resistance to abrasion and impact. Lastly, the cutting performance of the machine is significantly increased with hardened auger teeth. That is why you need to look out for this technique if you want to replace with high performing tools.

Metal Forging

One of the popular methods for enhancing the performance of auger teeth is through metal forging. It is one of the oldest tool hardening process and has been improved by modern technology. Unlike the past, when firewood was used as a source of heat for forging, today we have electricity and core as the major sources of heat. Instead of heating, you can also have cold forging as an alternative technique for auger teeth hardening. What makes forging popular with the manufacturer is that there is no raw material that is needed; hence, the overall cost of production is lower.

Brazing Tungsten Carbide

If the problem is with auger teeth breakage, then you need to consider the quality of the joint. Invest in brazing tungsten carbide since it offers a very strong joint. These are the kind of joints that can withstand the toughest condition without breaking. The technique is highly recommended for auger teeth for drilling demanding conditions such as rocky surfaces. However, you need to know the quality of brazing alloy material used for making the joint since it can make a huge difference.

0 comments:

Leave a Reply

Your email address will not be published.